Cloud PM4 User's Guide

PM4/8/12/16Digital Paging MicrophoneInstallation and User Guide

PM4/8/12/16 Installation and User Guide v2.210Using the PM - User InstructionsTo the installer: please photocopy this section and leave with the custo

PM4/8/12/16 Installation and User Guide v2.211Zone groupsZones may be ‘grouped’ together to simplify the procedure for paging several zones simultaneo

PM4/8/12/16 Installation and User Guide v2.212Accessing the internal PCBWith most installations, it will be necessary at some point to access the PM’s

PM4/8/12/16 Installation and User Guide v2.213shafts are still visible. Slide the PM over the screwheads using the keyhole slots, so that the rubber f

PM4/8/12/16 Installation and User Guide v2.214Power RequirementsThe PM can be powered either by an external power supply, or from a Cloud host mixer.U

PM4/8/12/16 Installation and User Guide v2.215 recommended cable length between the Cloud host mixer and the “last” PM should not exceed 50 m. If

PM4/8/12/16 Installation and User Guide v2.216The table below lists the current taken by various Cloud options which may be installed in the host mixe

PM4/8/12/16 Installation and User Guide v2.217 The IN port will only be used if the system is to have more than one PM. To connect the PM to another P

PM4/8/12/16 Installation and User Guide v2.218Connecting the PM to a mixer via the analogue interfaceIn addition to the Digital Paging Interface, the

PM4/8/12/16 Installation and User Guide v2.219The screen should be connected to 0 V at the mixer end only. The analogue control cable should have a to

PM4/8/12/16 Installation and User Guide v2.220Conguring the PMThe PM has a number of setup options which can be congured during installation. These

PM4/8/12/16 Installation and User Guide v2.221The zone offset applies to both the Digital Paging Interface and the analogue interface. If the analogue

PM4/8/12/16 Installation and User Guide v2.222Power-On Non-Volatile Memory (NVM) ResetAn internal non-volatile memory (NVM) stores user settings such

PM4/8/12/16 Installation and User Guide v2.223Interface. If the PMs are being used in conjunction with other (third-party) paging microphones using sh

PM4/8/12/16 Installation and User Guide v2.2245. Continue to hold the CLEAR button and complete the selection/deselection process with the ZONE b

PM4/8/12/16 Installation and User Guide v2.225The termination is set in the PM with jumper J4. See page 32 for a diagram showing jumper locations. The

PM4/8/12/16 Installation and User Guide v2.226Conguring dual purpose microphone inputs on the Host MixerNOTE: This section is only applicable to syst

PM4/8/12/16 Installation and User Guide v2.227Systems with multiple paging microphonesConnecting a single Cloud PM microphone to a host mixer is quite

PM4/8/12/16 Installation and User Guide v2.228Note that there is no restriction as to the PM model which is the “last” in the chain – i.e., that which

PM4/8/12/16 Installation and User Guide v2.229Using the analogue interface with multiple PMsThe “last” mixer in the chain – that connected to the host

PM4/8/12/16 Digital Paging Microphone

PM4/8/12/16 Installation and User Guide v2.230microphones to be unaware of it should they fail to notice the BUSY LED.If simultaneous announcements ar

PM4/8/12/16 Installation and User Guide v2.231Only one PM in a network will require the analogue interface for the whole network to be connected to a

PM4/8/12/16 Installation and User Guide v2.232AppendixPCB layout diagramREAR OF UNITCAN PORTOUT INFLASH MEMORY ICTERM2TERM4TERM1+ V 0 VZ1Z8Z7Z6Z5Z4Z3Z

PM4/8/12/16 Installation and User Guide v2.233Jumper and default settings summaryJumper Purpose DefaultJ1 Chime Select; +1 ONJ2 Chime Select; +2 OFFJ3

PM4/8/12/16 Installation and User Guide v2.234

PM4/8/12/16 Installation and User Guide v2.235

Cloud Electronics Limited140 Staniforth Road, Shefeld. S9 3HF. EnglandTel: +44 (0)114 244 7051 Fax: +44 (0)114 242 5462email: [email protected] web: w

PM4/8/12/16 Installation and User Guide v2.24ContentsIntroduction ...6Safety Informati

PM4/8/12/16 Installation and User Guide v2.25Chime settings ...23Enabl

PM4/8/12/16 Installation and User Guide v2.26IntroductionSafety InformationCloud PM paging microphones operate from a low DC voltage, supplied by eith

PM4/8/12/16 Installation and User Guide v2.27OverviewThank you for purchasing this Cloud PM paging microphone.Four models of the PM are available: the

PM4/8/12/16 Installation and User Guide v2.28Scope of this manualThe bulk of this manual is intended to guide you through the installation and congur

PM4/8/12/16 Installation and User Guide v2.29Controls and connections56789104123121114131594162 10135173 116184 12ACBDGROUPSTALKCLEARCALL ALLBUSYPM16I