Cloud LM-2 Series User's Guide download pdf (Page 6)

Z4-8MK3 Installation and User Guide6

Optional System Components

The following components may form part of the audio system

and may be ordered separately if required. They may also be

retrotted to a system at a later time. Separate datasheets

are available for each of the individual components; download

them at www.cloud.co.uk.

LM-2 Mic/line input module with remote

music control

MIC LEVEL

MUSIC LEVEL

LINE INPUT

MIC INPUT

LM-2

MIC

PRIORITY

The LM-2 is an active input module which allows a microphone

and a stereo line input to be connected to the Zone Mixer

in a remote location. The faceplate has both phonos and a

3.5 mm jack socket for connection of the line input, and

provides a convenient access point for the connection of a DJ

mixer, laptop, MP3 player or similar. Mic and line inputs have

separate level controls. A MIC PRIORITY button activates the

Zone Mixer’s priority circuitry; when enabled, a microphone

signal from the LM-2 will reduce the music level in the zone

where it is installed. Changing a rear jumper alters the priority

operation so that the mixed mic and line signals from the

module cause the mixer’s line input selected to the Zone to

be fully muted.

The module also includes the functions of the RSL-6 Remote

Control Plate, permitting control of zone music level and

source.

The LM-2 connects to one of the unit’s Facility Ports via

screened Cat 5 cable, and the remote inputs are fed to that

zone only. The mixer’s Mic inputs remain available. Multiple

LM-2s (in the same zone) may be daisy-chained to provide mic

inputs in more than one position. The LM-2 is available in sizes

to suit UK, US and German electrical back boxes; a choice

of nishes is also available. See “Connecting an LM-2 remote

input module” on page 12 and “LM-2 active input modules

– general considerations” on page 18 (LM-2 active input

modules – general considerations) for more information.

RL-1 Series Remote Music Level Control

MUSIC LEVEL

RL-1

The RL-1 Series is a range of small plates with a single control

for locally adjusting the music level in a zone. They connect

to one of the mixer’s REMOTE SOURCE + LEVEL ports. See

“Connecting an RL-1 Series remote control plate” on page

14 and “RL-1 Series and RSL-6 Series remote control plates

– general considerations” on page 19 for more information.

RSL-6 Series Remote Music Level/source

Control

RSL 6-

MUSIC LEVEL

SOURCE SELECT

The RSL-6 Series is a range of plates of the same size as

the RL-1s; they connect in a similar way. They allow local

music source selection as well as music level control. See

“Connecting an RSL-6 Series remote control plate” on page

14 and “RL-1 Series and RSL-6 Series remote control plates

– general considerations” on page 19 for more information.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Cloud LM-2 Series User's Guide Page 6

Comments to this Manuals

Related products and manuals for Audio mixers Cloud LM-2 Series