The GROUP MEMBER menu function allows the operator
to dene which Zones should be combined to form Groups.
Four Groups can be dened, with no restriction on Zone
membership. A Zone may be a member of more than one
Group, but if so, only one Group which includes that Zone
may be enabled at a time. Once set up, a Group may be
enabled or disabled at will by the user, via the GROUP
ENABLE function of the Groups Menu.
The rotary control selects the Group to have Zones
assigned. The Groups will be displayed as Group 1 to
Group 4 unless they have been renamed, in which case the
names will be displayed.
The eight numeric buttons correspond to the eight Zones;
they select Zone membership of the currently-selected
Group. Press the numeric buttons to select or deselect
Zones from the Group. Conrmation of Group membership
is given by the LEDs above the numeric buttons.
It should be noted that if a system uses multiple DCM-1s,
Groups can only comprise Zones within each DCM‑1;
Zones from different DCM-1s cannot be combined.
Comments to this Manuals