Cloud CXM User's Guide download pdf (Page 7)

CXM Technical

MANUAL

2.08 Stereo/mono

A mono switch is included and this simply links the two stereo signals, the

adjacent LED illuminates when the signals are linked.

2.09 Crossfade Assignment

Two crossfade assign switches are provided; with both switch A and switch B in

the off position, stereo signals are routed to bypass the crossfade circuitry.

Switch A routes signals to channel A and similarly switch B to channel B;

adjacent LED's indicate the selected channel. The switches are arranged to give

priority to channel A necessitating the release of channel A prior to selecting

channel B. (See 4.01 and 4.02 for details of crossfade and chopfade on master

module).

2.10 Auxiliary Sends

Two auxiliary sends are provided and can be individually configured to operate

in the pre-fade or post-fade mode by simply reversing a single circuit jumper

(see detail). This facility can be used to interface a variety of units for signal

processing, sampling, digital effects or as a flexible extra output facility. Factory

settings configure Aux 1 pre-fade and Aux 2 post-fade.

2.11 Balance Control

The balance control operates at -3dB at centre to infinity at extremes, with a

centre detent to aid positive positioning.

2.12 PFL (Pre Fade Listen)

This logic controlled momentary action switch routes the pre-fade signals to the

headphone amplifier and lower stereo LED bargraph display. The selection of a

channel PFL automatically cancels any prior selection. The adjacent LED

indicates status.

2.13 Peak LED

A red LED indicates the peak signal level at the pre-fade point and illuminates at

a level of approximately 4dB below clipping.

2.14 Channel Fader

The channel fader has a slide length of 100mm and an exceptionally smooth

feel. Under normal operating conditions, the fader is used fully open or fully off.

2.15 Remote start switch

A low voltage, fully floating, momentary action switch is fitted as standard. The

contact rating is 30V at 0.1A and is terminated with a 2 pole 3.5mm jack socket.

A latching action switch is available as an option.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

No comments

Cloud CXM User's Guide Page 7